Draper SLX17 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Projektorhalterungen Draper SLX17 herunter. Interactive SLX Submittal/Planning Sheet Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 4
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
Scissor Lift
SLX Series
Planning sheet submission required with your order or request for quotation. Please mark appropriate response to each numbered item (front and back)
by
Scissor Lift—SLX Series
Quantity
10 ft.—Model SLX10
14 ft.—Model SLX14
17 ft.—Model SLX17
21 ft.—Model SLX21
24 ft.—Model SLX24
28 ft.—Model SLX28
2 Standard, factory set “show” position is 36" (914 mm) below
“store” position. “Show” position can be adjusted after
installation. For “show” position of more or less than 36"
(914 mm), list show position:
3 Select Powder Coat Finish:
White (Standard) Black
Trim Ring Only (Standard)
Entire Environmental Air Space Housing
U.S. Patent D395,909
1 Select one model based on the maximum exact distance you need the projector to descend from “store” position to
“service” position.
DRAPER SALESPERSON:
CUSTOMER CONTACT:
SIGNATURE:
Copyright © 2015 Draper Inc. Form ScissorLiftSLX_Sub-PlanSheet15-R Printed in U.S.A.
DEALER NAME:
PROJECT NAME:
P.O. #:
DATE:
(Continued on Page 2)
Table A
Closed Extended
Model Height Height
SLX10 14
1
/
16
" (36 cm) 10'7" (232 cm)
SLX14 16
5
/
16
" (42 cm) 14'2" (432 cm)
SLX17 18
9
/
16
" (47 cm) 17'8" (538 cm)
SLX21 20
13
/
16
" (53 cm) 21'3" (648 cm)
SLX24 23
1
/
16
" (60 cm) 24'9" (754 cm)
SLX28 25
5
/
16
" (65 cm) 28'5" (866 cm)
Specifications—Scissor Lift SLX
video projector lifts for projectors weighing up to 350 lbs (158.8kg).
White or black powder coat finish. Projector bolts onto operating pan, or
mounts to pan with mounting bracket (by others). Electrically operated 110-
120V AC, 60 Hz. UL recognized gearmotor, with metal chain drive system, to
be lifetime lubricated.
Projector to be suspended from steel pan supported by steel scissor arms
and operated by two,
3
/
16
" (4.7625 mm) aircraft cables with 4200 foot/pounds
tensile strength per cable.
Equipped with 3 sets of stabilizing scissors, positioned on the left, right, and
rear sides. Also equipped with fail-safe inertial safety belt system and Cable
Management System with projector power cord. Factory set limit switches to
automatically stop travel at store, show, and service positions. Single Station
Low Voltage Control, standard, consists of one 3-button wall switch to lower lift
from “stored” to “show ” position, and one momentary key switch to lower lift to
“service” position.
Scissor Lift SLX is approved to UL 2442 and CSA C22.2 No. 60065-03.
Optional Current Sensor available.
Optional Environmental Air Space Housing: Consists of suitable painted
steel panels for use in return air plenum situations. Includes trim ring for
ceiling opening. Two sizes available.
Optional ceiling closure panel: Finished in white baked textured powder
coat, shall descend smoothly with projector. Two sizes available.
Ceiling Finish Kit: Finished white. Trims ceiling opening when required.
Consists of trim ring and closure panel. Two sizes available.
Factory-installed control cables available.
Please Note: The Scissor Lift SLX should be specified in conjunction with a
Draper motorized screen.
Optional Ceiling Access Door: Provides access to projector and lift when
unit is installed above hard ceiling. Two styles: White painted finish or accepts
ceiling tile.
Downloadable 3-part specifications are available at www.draperinc.com.
U.S. Patent Number D395,909.
36
3
/
16
"
(919
mm)
38
5
/
16
"
(973
mm)
35
9
/
16
" (903 mm)
37
11
/
16
" (957 mm)
See
Ta ble
A
35
7
/
16
" (900 mm)
37
1
/
16
" (941 mm)
42" (1067 mm)
36¼" (921 mm)
39
1
/
16
" (992 mm)
42" (1067 mm)
35" (889 mm)
1
9
/
16
"
(39.6875
mm)
1
/
8
"
(3.175
mm)
Top View
Front View Side View
9
/16" (14 mm)
x 4
For drawings/dims
with Environmental Air
Space Housing, see
page 3.
There are two
sizes of closure.
See page 3.
There are two
sizes of closure.
See page 3.
16" (406 mm) thread-
ed rod included. Can
be cut down to match
projector and mount
dims.
Draper does not recommend setting show position at the maintenance/
service position. For example, if you wish to have 8' (2.4 m) Show position,
order a lift with at least a 10' (3 m) maintenance position.
Submittal and
Planning sheet
Seitenansicht 0
1 2 3 4

Inhaltsverzeichnis

Seite 1 - SLX Series

Scissor Lift SLX SeriesPlanning sheet submission required with your order or request for quotation. Please mark appropriate response to each numbered

Seite 2 - page 2 of 4

4 Select Optional Accessories Optional Ceiling Access Door (2' x 2' [60 x 60 cm]) to allow access above finished ceiling (highly recommen

Seite 3 - page 3 of 4

DRAPER SALESPERSON: CUSTOMER CONTACT: SIGNATURE: (765) 987-7999www.draperinc.comScissor Lift Submittal & Planning Sheet for SLX Series page 3 of

Seite 4 - page 4 of 4

DRAPER SALESPERSON: CUSTOMER CONTACT: SIGNATURE: (765) 987-7999www.draperinc.comScissor Lift Submittal & Planning Sheet for SLX Series page 4 of

Kommentare zu diesen Handbüchern

Keine Kommentare