Draper SLX12 Betriebsanleitung PDF herunterladen (Seite 7)

230 V AC Scissor Lift SLX by Draper page 7 of 7

Installing Optional Environmental Air Space Housing

The Environmental Air Space Housing is shipped in pieces, and must be

assembled by the installer. The height of the Environmental Air Space Hous

ing is set by punching out the knockouts at the desired locations then using

screws to connect in side panels. It is recommended that an access panel be

installed in the ceiling to allow future access. The optional Environmental Air

Space Housing must be installed per instructions to isolate the lift from the

“other space used for environmental air.”

Caution: Be careful when handling Environmental Air Space

Housing Panels. The panels could have sharp edges.

FRONT / BACK

Item Qty Part Number Description

1 1 C028.544.02SA Frame, SLX Plenum

2 1 C028.545.07SA Frame, SLX Trim Ring

3 4 C044.178SA Panel, SLX Plenum Side

4 4 C044.180SA Panel, SLX Plenum End

5 2 C044.179SA Panel, SLX Middle End

6 2 C044.177SA Panel, SLX Plenum Middle Side

7 1 C095.123SA Cover, SLX Plenum

8 28 C020.325 Screw, 8-32 x

" Type 1 HWH

9 40 C018.051 Nut #8-32 Zinc Hex KEPS

 12 C013.070 Washer, .188 I.D. x .5 O.D. x .07" TK Nylon Flat

 24 C020.112 Screw, 8-32 x

" Type F HWH

Do not use

electrical knockouts

on bottom sections

1 Attach Environmental Air Space Housing top frame to top of Scissor Lift

SLX with bolts provided.

2 Install top panel to Environmental Air Space Housing frame.

3 Attach assembly to overhead structure. Allow clearance between Environ-

mental Air Space Housing top and structure for ease of future access.

4 Install side and end panels, and trim frame.

Knockouts

(765) 987-7999www.draperinc.com

1 2 3 4 5 6 7

Keine Kommentare

Draper SLX12 Betriebsanleitung Seite 7