Draper Ultimate Folding Screen Handbuch PDF herunterladen

Assembly Instructions

Ultimate Folding Screen Dress Kit by Draper

① Attach Valance Bar to frame (see Fig. 1).

If you encounter any difﬁ culty installing or ser vic ing your Ultimate Folding Screen Dress Kit by Draper,

call your dealer or Draper, Inc., Spiceland, Indiana, (765) 987-7999 or fax (765) 987-7142.

③ Drapery Bars mount to Valance Bar and lock using a ball detent

(see Fig. 3).

② Valance and Drapes snap onto Mounting Bars as shown below. Please

Note: The valance will likely show some fullness (see Fig. 2).

④ For adjustable skirt bar, see box below. For standard skirt attachment:

The skirt attaches to snaps located along the bottom black border of the

viewing surface. (see Fig. 4)

Audience

Figure 1

Figure 2

Figure 3

Figure 4

Caution: Beware of pinch points.

For the ability to change from one viewing format to another (for in-

stance, form NTSC 4:3 to HDTV 16:9), use Draper's Adjustable Skirt Bar:

Attach one end of skirt bar to either leg by placing the outer plate on

the outside of the leg/frame, and placing the handy crank and washer on the

inside. Run the handy crank through the gap between the leg and frame (gap

between leg and frame), then attach the other end to the other leg. The skirt

then attaches to snaps located along the skirt bar.

Adjustable Skirt Bar

for multiple formats

If adjustable skirt bar is provided with a Middle Support, place in center

of bottom frame and use adjustment knob to set to the proper height (see

pictures below).

Please Note: Middle Support height should be set so the bottom of the

screen frame is supported, but is not pushed upward so that it bows

up in the center.

Keine Kommentare

Draper Ultimate Folding Screen Handbuch