Draper SC1 Bedienerhandbuch PDF herunterladen (Seite 25)

DIN-RailTransformer—DR-240

Features:

- Universal AC input/full range

- Built in active PFC function

- Protections: Short circuit/Overload/Over voltage/Over temperature

- Cooking by free air convection

- Can be installed on DIN rail TS-35/7.5 or 15

- UL 508(industrial control equipment/approved

- LED indicator for power on

- 100% full load burn-in test

- Fixed switching frequency at 100KHz

- 3 years warranty

SPECIFICATION

MODEL DRP-240-24

DC Voltage 24V

Rated Current 10A

Current Range 0 – 10A

Rated Power 240W

Ripple & Noise (max.) Note 2. 80mVp-p

OUTPUT Voltage Adj. Range 24 – 28V

Voltage Tolerance Note 3. ±1.0%

Line Regulation ±0.5%

Load Regulation ±1.0%

Set Up, Rise Time 800ms, 40ms/230VAC 800ms, 40ms/115VAC at full load

Hold-Up Time (Ty.) 24ms/230VAC 24ms/115VAC at full load

Voltage Range Note 5. 65 – 264VAC 120 – 370VDC

Frequency Range 47 – 63 Hz

INPUT Efﬁ ciency (Typ.) 84%

AC Current (Typ.) 2.8A/115VAC 1.4A/230VAC

Inrush Current (Typ.) Cold Start 27A/115VAC 45A/230VAC

Leakage Current <3.5mA/240VAC

Overload

105 – 150% rated output power

Protection type: Constant current limiting, recovers

automatically after fault condition is removed

PROTECTION Over Voltage

30 – 36V

Protection type: Shut down o/p voltage, re-power on to recover

Over Temperature

100°C±5°C(TSW1)detect on heat sink of power transistor

Protection type: shut down o/p voltage, recovers automatically

after temperature goes down

Working Temp. -10 – 70+C (refer to output load derating curve)

Working Humidity 20 – 90% RH non-condensing

ENVIRONMENT Storage Temp. Humidity -20 - +85C, 10 – 95% RH

Temp, Coefﬁ cient ±0.03%/C (0-50°C)

Vibration

10 – 500Hz, 2G 10min./.1cycle.60min.each along X, Y, Z axes;

Mounting Compliance to IEC60068-2-6

Safety Standards UL508, UL60950-1, TUV EN60950-1 approved

Withstand Voltage !/P-O/P.3KVAC I/P-FG.1.5KVAC 0/P-FG.0.5KVAC

SAFETY & Isolation Resistance I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC

EMC (Note 4.) EMI Conduction & Radiation Compliance to EN55011 (CISPR11) EN55022 (CISPR22), EN61204-3 Class B

Harmonic Current Compliance to EN61000-3-2,-3

EMS Immunity

Compliance to EN61000-4,2,3,4,5,6,8,11, ENV6150204, EN55024,

EN61000-6-2 (EN50082-2), heavy industry level, criteria A

MTBF 105.5Khrs.min. MIL-HDBK-217F (25°C)

OTHERS Dimension 125.5°125.2°100mm(W”H”D”)

Packing 1.2Kg; 12pcs/16.5Kg/1.29CUFT

NOTE: ➀ All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.

➁ Ripple & noise are measure at 20MHz of bandwidth by using a 10” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

➂ Tolerance: includes set up tolerance, ﬁ re regulation and load regulation.

➃ The power supply is considered a component which will be installed into a ﬁ nal equipment. The ﬁ nal equipment must be reconﬁ rmed that it still

meets EMC directives.

➄ Derating may be needed under low input voltages. Please check the derating curve for more details.

Page 25 of 120

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 119 120

Kommentare zu diesen Handbüchern

Keine Kommentare

Draper SC1 Bedienerhandbuch Seite 25

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Draper SC1