Draper SC1 Bedienerhandbuch PDF herunterladen (Seite 45)

IntelliFlex™ Inputs

We have many different low voltage input devices for controlling shades through

IntelliFlex. Here is a listing and brief description of each input available to you.

- IR control- This is an IR eye plugged in an SC1, SGC4, or SPGC4 to

receive IR remote commands.

- RF control- This is an RF receiver plugged in an SC1, SGC4, or SPGC4 to

receive RF remote commands. Long range antennas are available.

- IntelliFlex wall switch- This switch comes as a BUS version which plugs

directly into a SC1, SGC4, or SPGC4 or an RF version which talks to an

RF receiver. These versions of the switch are programmable to send out

whatever commands are desired. Dry contacts version which are not

programmable are also available for some types.

- RS 232 interface- This is an RS 232 bridge to run shades from RS 232

commands. These commands can give full function to the controls.

- Sun sensors- This is an interior sensor that will read light intensity and run

a group of shades up and down accordingly. It does not track the sun’ s

movement.

- Timer- This item will run a group of shades up and down at given times of

the day.

- Dry Contact Converter- This item takes dry contact commands and turns

them into bus commands for the SC1’s to respond.

- SolarFlex- This is a sun tracking software which is programmed to drive a

speciﬁ c building’s shades per the needs of the end user based on the sun’s

position.

- Dry Contacts- The SC1, SGC4, and SPGC4 are built with dry contacts

already on them so one can connect dry contacts to one of the controls to

drive it. The dry contacts on the controller itself will not communicate on the

BUS line.

- Two-way communication on the bus line can be accomplished with certain

input set-ups and cabling. Ask Draper for more details.

ALL

OPEN CLOSE

STOP

ALL

OPEN CLOSE

STOP

R2D7 v2

Technology made simple

SYS 7 SYS 6 SYS 5 SYS 4

SYS 1 SYS 2 SYS 3 RS-232

MAIN

Wind

Input

Disable

Switch

Light

Sensor

Switch

EYE

BUS

RS232

PSSW

Red = Program Mode

Green = Visible Light

(Test Mode Only)

CAL

CLK PGM AUTO

RAND

MAN

OFF

MO TU WE TH FR

SU ON

12:00 d

MODE

NEXT/

ON/

OFF

RESET

DAY/

DST

HOUR+

YEAR-

M+

ZONE-

YEAR-

IR control

RF control

IntelliFlex

wall switch

RS 232

interface

Sun

sensor

Timer

Dry Contact

Converter

Dry Contacts

Page 45 of 120

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 119 120

Kommentare zu diesen Handbüchern

Keine Kommentare

Draper SC1 Bedienerhandbuch Seite 45

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Draper SC1