Draper SC1 Bedienerhandbuch Seite 63
- Seite / 120
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
SUN AND WIND SENSOR V1.l and SUN SENSOR SWITCH V4 by Draper Page 8 of 9
NO intermediate positions on Sun:
High (2
nd
from the top) and medium-high (3d from the top) buttons. Sunrise & Sunset events will be set as shown in
"Sun Intermediate Stops'' section above under “No Intermediate Positions." Selected Sun level is set to high.
The SC1s intended to be controlled by the SUN AND WIND SENSOR are NOT affected by this action and must be
programmed separately.
ONE intermediate position on Sun:
High (2nd) and medium (4th) buttons. Sunrise & Sunset events will be set as shown in "Sun Intermediate Stops"
section above under "One Intermediate Position." Selected Sun level is set to high.
The SC1s intended to be controlled by the SUN AND WIND SENSOR are NOT affected by this action and must be
programmed separately.
TWO intermediate positions on Sun:
High (2
nd
) and medium-low (5th) buttons. Sunrise & Sunset events will be set as shown in "Sun Intermediate Stops"
section above under "Two Intermediate Positions." Selected Sun level is set to high.
The SC1s intended to be controlled by the SUN AND WIND SENSOR are NOT affected by this action and must be
programmed separately.
THREE intermediate positions on Sun:
High (2nd) and low (6
th
) buttons. Sunrise & Sunset events will be set as shown in "Sun Intermediate Stops" section
above under 'Three Intermediate Positions." Selected Sun level is set to high. This button combination may be called
Toggle Reference in the Sun Sensor Switch documentation, but the function is as described here for SUN AND
WIND SENSOR.
The SC1s intended to be controlled by the Sun and Wind Sensor are NOT affected by this action and must be
programmed separately.
FOUR intermediate positions on Sun:
Medium-high (3d) and medium (4
th
) buttons. Sunrise & Sunset events will be set as shown in "Sun Intermediate
Stops" section above under "Four Intermediate Positions." Selected Sun level is set to high. This button combination
may be called Toggle Motor Leads in the Sun Sensor Switch documentation, but the function is as described here for
SUN AND WIND SENSOR.
The SC1s intended to be controlled by the Sun and Wind Sensor are NOT affected by this action and must be
programmed separately.
Sun Sensor in Summer mode:
Medium (4th) and medium-low (5th) buttons. All Sunrise & Sunset events will be Summer actions. This button
combination may be called Auto-return in the Sun Sensor Switch documentation, but the function is as described
here for SUN AND WIND SENSOR.
Sun Sensor in Summer mode:
Medium (4th) and low (6th) buttons. All Sunrise & sunset events will be Winter actions. This button combination
may be called Auto-return in the Sun Sensor Switch documentation, but the function is as described here for SUN
AND WIND SENSOR.
Pressing the button combination to start Calibration will light all 5 LEDs indicating the function is not supported.
Programming the Sun Sensor Switch, Accessory number, BUS & Sun Sensor Switch jacks:
There is no association between the Sun Sensor (Decorator) Switch "accessory number" and simulated SC1 "main
channel".
The Sun Sensor Switch simply works with whatever SUN AND WIND SENSOR it is plugged into. The messages
going between the Sun Sensor Switch for status display and the SUN AND WIND SENSOR are special and not
repeated to the BUS jack.
Page 63 of 120
- Table of Contents 1
- Page 2 of 120 2
- Installation Tips 3
- Page 4 of 120 4
- Radio Motor Transmitters 5
- Telis Transmitters 6
- 20-Channel Transmitter 7
- DECORA RTS SWITCH 8
- Mounting Instructions 9
- (765) 987-799 10
- Page 10 of 120 10
- Inteo Chronis RTS Timer 11
- Quick Reference Guide 11
- Inteo Light Sensor 12
- Installation Guide 12
- RTS Dry Contact Interface 15
- Operating Instructions 15
- Universal RTS Interface II 16
- OPERATION 17
- RS232 to RTS Interface 18
- RTS Repeater 19
- Radio Motor Accessories 20
- Battery Wands 21
- Plug-In Transformers 22
- DIN-Rail Transformer—DR-120 23
- Page 24 of 120 24
- DIN-RailTransformer—DR-240 25
- Page 26 of 120 26
- DIN-RailTransformer—DR-480S 27
- Page 28 of 120 28
- 10 Motor Power Panel 29
- Centralis Receiver 30
- Page 31 of 120 31
- 3-Position Key Switch 32
- MS-3R, MS-4R 33
- Multiple-Station Control 33
- Page 34 of 120 34
- Isolating Relays 35
- Isolating Relay by Draper 36
- IntelliFlex™ GC4 37
- GC4 Control by Draper 38
- IntelliFlex™ SC1 39
- SC1 Control by Draper 40
- IntelliFlex™ SGC4 41
- SGC4 Control by Draper 42
- IntelliFlex™ SPGC4 43
- SPGC4 Control by Draper 44
- IntelliFlex™ Inputs 45
- ™ by Draper 46
- IR Remote Control by Draper 47
- Page 48 of 120 48
- RF Remote Control by Draper 49
- Page 50 of 120 50
- Wall Switch 51
- Wall Switch by Draper 53
- Page 56 of 120 56
- Page 57 of 120 57
- Page 58 of 120 58
- Page 59 of 120 59
- Page 60 of 120 60
- Page 61 of 120 61
- Page 62 of 120 62
- Page 63 of 120 63
- Page 64 of 120 64
- LCD Timer by Draper 65
- Battery Replacement 66
- Page 67 of 120 67
- Installation Instructions 68
- Controls 69
- Planning Sheet 70
- Page 71 of 120 71
- ILT Wall Switch 73
- ILT Switch and Limit Sets 74
- ILT Dry Contact Interface 75
- Wiring Diagram 75
- Page 76 of 120 76
- Draper Digital Network 77
- Page 78 of 120 78
- RS485-ILT Link 79
- Specifi cation: 80
- Back of Switch 80
- Page 81 of 120 81
- Draper Motor Grid 82
- Page 83 of 120 83
- Page 84 of 120 84
- Page 86 of 120 86
- Page 87 of 120 87
- Page 88 of 120 88
- Page 89 of 120 89
- Page 90 of 120 90
- Page 91 of 120 91
- Page 93 of 120 93
- Page 94 of 120 94
- Page 95 of 120 95
- Page 96 of 120 96
- Page 98 of 120 98
- Wago w or w/o wall plate 99
- 100
- Page 103 of 120 103
- Page 104 of 120 104
- Minimum Shade Sizes 105
- Minimum Shade Sizes—Continued 106
- Motorized FlexShade by Draper 107
- Page 2 of 2 108
- FlexShade 2 by Draper 109
- Cleaning and Maintenance 110
- Colossal FlexShade by Draper 111
- Date DWG No 113
- To Station-Bed 114
- Interface 114
- (this interface is 114
- Wiring by Installer 115
- Tolerance 115
- Page 118 of 120 118
- Page 119 of 120 119
- Contacting Draper 120
Verwandte Produkte und Handbücher für Nein Draper SC1
Nein Draper 59319 Spezifikationen
(12 Seiten)
(12 Seiten)
Nein Draper MC1 Bedienungsanleitung
(9 Seiten)
(9 Seiten)
Nein Draper SGC4 Bedienerhandbuch
(124 Seiten)
(124 Seiten)
Nein Draper 503096 Bedienungsanleitung
(1 Seiten)
(1 Seiten)
Nein Draper TB-25R Bedienungsanleitung
(1 Seiten)
(1 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.042 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern