Draper SC1 Bedienerhandbuch PDF herunterladen (Seite 27)

DIN-RailTransformer—DR-480S

Features:

- AC input range selectable by switch

- Built in passive PFC function compliance to EN61000-3-2

- High-efﬁ ciency 89% and low dissipation

- Protections: Short circuit/Over Load/Over voltage/Over temperature

- Cooling by free air convection

- Built-in constant current limiting circuit

- Can be installed on DIN rail TS-35/7.5 or 15

- UL 508 (industrial control equipment) approved

- EN61000-6-2(EN50082-2) industrial immunity level

- 100% full load burn-in test

- 3 years warranty

SPECIFICATION

MODEL DRP480S-24

DC Voltage 24V

Rated Current 20A

Current Range 0 – 20A

Rated Power 480W

Ripple & Noise (max.) Note 2. 120mVp-p

OUTPUT Voltage Adj. Range 24 – 28V

Voltage Tolerance Note 3. ±1.0%

Line Regulation ±0.5%

Load Regulation ±1.0%

Set Up, Rise Time 1200ms, 40ms/230VAC,115VAC at full load

Hold-Up Time (Ty.) 23ms/230VAC, 115VAC at full load

Voltage Range Note 5. 90 – 132VAC/180 264VAC by switch 254-370FDC

Frequency Range 47 – 63 Hz

Power Factor (Typ.) ≥ 0.7/230VAC only

INPUT Efﬁ ciency (Typ.) 89%

AC Current (Typ.) 8A/115VAC 3.2A/230VAC

Inrush Current (Typ.) Cold Start 27A/115VAC 45A/230VAC

Leakage Current <3.5mA/240VAC

Overload

105 – 150% rated output power

Protection type: Constant current limiting, recovers

automatically after fault condition is removed

PROTECTION Over Voltage

30 – 36V

Protection type: Shut down o/p voltage, re-power on to recover

Over Temperature

100°C±5°C(TSW: detect on heat sink of power switch

Protection type: shut down o/p voltage, recovers automatically

after temperature goes down

Working Temp. -20 – +70°C (refer to output load derating curve)

Working Humidity 20 – 90% RH non-condensing

ENVIRONMENT Storage Temp. Humidity -40 - +85°C, 10 – 95% RH

Temp, Coefﬁ cient ±0.03%/C (0-50°C)

Vibration

Component 10 – 500Hz, 2G 10min./.1cycle.60min.each along X, Y, Z axes; Mounting

Compliance to IEC60068-2-6

Safety Standards UL508, UL60950-1, TUV EN60950-1 approved

Withstand Voltage !/P-O/P.3KVAC I/P-FG.1.5KVAC 0/P-FG.0.5KVAC

SAFETY & Isolation Resistance I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC

EMC (Note 4.) EMI Conduction & Radiation Compliance to EN55011, EN55022, (CISPR22) Class B

Harmonic Current Compliance to EN61000-3-2,-3

EMS Immunity

Compliance to EN61000-4,2,3,4,5,6,8,11, ENV50204, EN61204-3,

EN61000-6-2 (EN50082-2), heavy industry level, criteria A

MTBF 187.9Khrs.min. MIL-HDBK-217F (25°C)

OTHERS Dimension 227°125.2°100mm(W”H”D”)

Packing 2.60Kg; 6pcs/16.6Kg/1.75CUFT

NOTE: ➀ All parameters NOT specially mentioned are measured at 230VAC input, rated

load and 25°C of ambient temperature.

➁ Ripple & noise are measure at 20MHz of bandwidth by using a 10” twisted pair-

wire terminated with a 0.1uf & 47uf parallel capacitor.

➂ Tolerance: includes set up tolerance, ﬁ re regulation and load regulation.

➃ The power supply is considered a component which will be installed into a ﬁ nal

equipment.

➄ The ﬁ nal equipment must be reconﬁ rmed that it still meets EMC directives.

Page 27 of 120

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 119 120

Kommentare zu diesen Handbüchern

Keine Kommentare

Draper SC1 Bedienerhandbuch Seite 27

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Draper SC1