Draper SC1 Bedienerhandbuch Seite 93

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 120
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 92
Motor Name:
510S2PA
RPM: 38
Volts: 120 Amps: 1.3
Min. Shade Width: 36” om
Standard Motor Lead Length: 6’
Lead Type:
18-3 w/ground
Plug Options: Wago w or w/o wall plate
Anderson w or w/o wall
plate
Limit Type: Push Button
Special Notes:
This motor is step up in power from the
standard Flex 2 motor. It is included in pricing
where needed.
Installation Procedure:
1. Install Brackets, endcaps, or box to mount shade
2. Test motor using a motor test cable and adjust
limits.
3. Let electrician connect to wiring
4. If control programming is required, then
program and set controls.
5. Test motors through wiring using switches
Controls that motor can wire into: Isolating Relays, SC1 controllers, GC4 control, SGC4 control,
SPGC4 control, Keyed Wall Switch, SP/DT toggle switch, DP/DT toggle switch, Animeo for questions
on other controls ask Draper, Inc.
Used in: Flexshade 2 Hardware only
Optional Lead Lengths: 12’ and 24’
Part No: C047.058
Product (s) Used In: Flexshade 2
Roller Diameter Choices: 4” steel
Parallel Wire:
No
Torque in Nm: 10
Page 93 of 120
Seitenansicht 92
1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 119 120

Kommentare zu diesen Handbüchern

Keine Kommentare